Static Cleanroom Pass Box Pharmacy Laboratory Cold Roll Steel Cabinet
Quick Detai :
External size : 700x500x590mm
Internal size : 500x500x500mm
Material: inside is SUS304/201.
Outside is steel with power coated
Reliable Mechanical Interlock
SS 304 base surface
Controlling the ingress of particulate contamination into
cleanrooms and other controlled environments is paramount in order
to maintain the integrity of products and processes. Personnel
traffic is the most
important factor which must be controlled. KELING cleanroom Pass
Boxes and Transfer Hatches are an effective solution as they allow
materials to be transferred into the controlled environment without
actual personnel movement. They may also be used to protect the
external environment from egress of contamination,for example, in
biological safety laboratory applications.
Three types window for your choose :
A: Electronic interlock transfer window
B: Mechanical interlock transfer window
C: Self purification transfer window
cleanroom pass box use for micro-electronics, laboratory, national
defense, precise instrument and gauges, bio-pharmaceuticals,
operating features :
1: Contamination-free transfer of materials in and out of the
2: Eliminates unnecessary personnel entry
3: Full range of sizes meets any application
4: Stainless steel doors, latches and hinges extend service life—a
must in a production environment!
5: Foolproof interlock mechanism prevents cross-contamination, is
reliable and maintenance-free
6: Material options accommodate many application requirements, from
chemical resistance to static control to fire safety
7: Accessories include LockLatc, safety sprinkler, air shower and
Class 10 HEPA filter/blower module
Easy to install.
cleanroom pass box KEL-PB500
External size (mm)
Internal size (mm)
1: Entirety Sus201/304.
2: External is steel with power coated, Internal is SUS304.
3: External is steel with power coated. Internal is SUS301.
Glass window size
Mechanical or electronic for your choose
Cleanroom Pass Box can be installed in a number of ways:
cleanroom pass box is depending on the wall or door that will
support them. The ordering chart indicates the cut-out size
necessary to support each model size (simply add 13 mm to the box
width and height).
KEING offers mounting brackets and hardware to ensure secure
mounting. In most cases,a bracket kit provides ample support.
Models are available for either wall mounting (at a convenient
or floor mounting (to allow passage of carts and other equipment
along the floor).
Select support brackets for 914 mm wall-mount models.
Note: Brackets are mounted to allow chambers to protrude 51 mm on
the cleanroom side (specify other desired position).
Standard cleanroom pass box mounting
All models include mounting brackets (stainless or powder-coated
steel). All brackets require 6 mm clearance between the wall
cut-out and the pass-through. Standard mounting is 51 mm from the
front of the cleanroom side (specify other desired location). For
All of equipment is individually factory tested for safety and
performance in accordance with international Standards. Each unit
is shipped with a documentation outlining the tests undertaken and
the units individual results for each unit.
Factory test include:
--functional test and visual inspection
--electrical safety tests
--air velocity testing
--purification rank test (if need)
Our equipment is warranty for 1 year excluding consumable parts and
All equipment is shipped with a comprehensive use’s manual complete
with a report documenting all test procedures.
Additional IO/OQ/GMP document is available upon request.
Contact our sales representative for specific warranty details or
Consumable parts illustration:
1: Pre-filter: each one should be replacement in each 6 month, but
it can refresh no more three times.
2: HEPA filter: each one should be replacement in each half and one
T/T in advance, 30% before place the order, 70% when you see copy
Or 30% T/T in advance before place the order, 70% LC at sight.